PonyProg :  PonyProg Phorum PonyProg
PonyProg open discussion 
PonyProg for Windows 7 ?
Posted by: Gooliver57 ()
Date: April 15, 2010 04:16PM

Dear sir Claudio Lanconelli!
Your program PonyProg is widely used in Russia. The program very well works in operational system Windows XP. Recently users had problems. The program does not wish to work in operational system 32bit Windows 7. This problem we can not solve. You will make new program PonyProg for Windows 7? There Is at you scheme USB dtvice for program PonyProg?
Yours faithfully
Russia, St.-Petersburg.

Mister Lanconelli reads a forum? It plans to update a software for new systems?



Edited 1 time(s). Last edit at 04/22/2010 07:49AM by Gooliver57.

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: hassan ()
Date: January 01, 2012 02:21AM

hi u remined me my stub born days. first of all check either driver io linx port drvier is present or not, i not try to solve ths first

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: Radon ()
Date: February 01, 2012 09:49AM

I've tried using PonyProg 2.07C for Windows 7.
"Read Device" = OK
"Write Device" = FAIL

What should I do with my Windows 7 setting ?
Should I wait for Ponyprog 3.XX ?

Good Luck, Mr. Claudio Lanconelli...

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: Jaka57 ()
Date: February 09, 2012 11:24PM

Search the forum and you will find a solution.

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: Radon ()
Date: April 18, 2012 01:44PM

wkwk...., forum yang mana nih ?

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: h schemmann ()
Date: June 20, 2012 01:43PM

Hi,
i installed with "Windows 7" and had sporadic write problems initially.
The program files directory cannot be written by the program.
Guess some calibration data in the INI file are lost.
Changing path to "Program Data" seems to fix it
hs

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: gordon-- ()
Date: January 18, 2013 07:26PM

Try the unofficial fix from this thread: http://ponyprog.sourceforge.net/phorum/read.php?2,2249

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: jan novak ()
Date: February 01, 2013 03:48PM

The ponyprog must probably run with administrator permission. And it may be needed to set file acces permissions of the ponny prog directory to r/w for non-administration user (all of directories in programfiles have inherited permissions for r/w only for administrations user).
In may system under Vista the PonnyProg must run with administrator rights, under XP it is not needed, but the directory with init file must be accesible for writing by ponnyprog.
Under win64 I have succecfully tried diferrent version (see http://ponyprog.sourceforge.net/phorum/read.php?2,2249).

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: Phil Radford ()
Date: February 08, 2013 11:42AM

Just so all reading this forum/thread. I use PonyProg Version 2.07c under windows 7 64bit with home made programmer. I also use PonyProg Version 2.07c to up load hex files to Arduino board and it works well without any problems at all. So thank you for the program. Looking forward to up dates now, need to program atmega328.

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: venkatesh ()
Date: June 16, 2013 08:21PM

The version 2.07C is working but the problem that I faced was, it says the device detect fail, read command as failed when working with atmega48pa. But if we download the code, verification will be success and also the code runs well on the target as well. It works on Windows 7 32 bit version. Tested for Atmega48

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: lancos ()
Date: November 06, 2013 04:14PM

Try version 2.08c
https://downloads.sourceforge.net/project/ponyprog/PonyProg%20Windows%20setup/2.08c/setup-PonyProgV208c.zip

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: dika ()
Date: March 21, 2014 08:49AM

thanks lancos..
it's worf for 64bit Windows 7

Options: ReplyQuote
Re: PonyProg for Windows 7 ?
Posted by: DIEGUITO ()
Date: August 23, 2016 06:10PM

por favor necesito que me confirmen si el software ponyprog no se usa en windows 7.
si o no.
gracias

Options: ReplyQuote


Return to LancOS.
Powered by Phorum.