PonyProg :  PonyProg Phorum PonyProg
PonyProg open discussion 
ATtiny4313 support
Posted by: Siberian ()
Date: September 16, 2015 12:14PM

Hi from cold Siberia!

Trouble came from not waiting. The pilot sample I did on ATtiny2313. But for a series of devices I purchased ATtiny4313 because they cost the same. It was only when I got to program the devices, it appears that a amazing programmer PonyProg does not support ATtiny4313! I'm so used to this programmer, it just did not think to check the list of supported chips. yawning smiley(

Do you plan to expand the list of supported chips?


Give more and different microcontrollers! yawning smiley)

Options: ReplyQuote
Re: ATtiny4313 support
Posted by: sonix ()
Date: September 16, 2015 08:29PM

Hi Siberian,

I added support to PonyProg2000 for the new device ATtiny4313. I do not have this device type therefore I can not test it. In attachment you will find archived executable file "PonyProg2000.exe". Please backup your original PonyProg2000.exe from ponyprog folder and then replace it with this one.

Please could you test (read/write flash+eeprom data, read/write only flash, read/write only eeprom, read/write fusebit e.g. CKDIV8, erase device) it and reply to me if everything is OK?


Thanks in advance.


Yours sincerely
sonix


Siberian Wrote:
-------------------------------------------------------
> Hi from cold Siberia!
>
> Trouble came from not waiting. The pilot sample I
> did on ATtiny2313. But for a series of devices I
> purchased ATtiny4313 because they cost the same.
> It was only when I got to program the devices, it
> appears that a amazing programmer PonyProg does
> not support ATtiny4313! I'm so used to this
> programmer, it just did not think to check the
> list of supported chips. yawning smiley(
>
> Do you plan to expand the list of supported
> chips?
>
>
> Give more and different microcontrollers! yawning smiley)

Attachments: PonyProg2000_v2.08d_mod1.01d.zip (195.8 KB)  
Options: ReplyQuote
Re: ATtiny4313 support
Posted by: Siberian ()
Date: September 17, 2015 12:16PM

Hello again!

sonix Wrote:
-------------------------------------------------------
> Please could you test (read/write flash+eeprom
> data, read/write only flash, read/write only
> eeprom, read/write fusebit e.g. CKDIV8, erase
> device) it and reply to me if everything is OK?

I checked the all while except read/write some fusebit.
Read/write memories works properly in different sequences.

Thank YOU! Very very much!

>
>
> Thanks in advance.
>
>
> Yours sincerely
> sonix
>
>

> > Give more and different microcontrollers! :0)

Options: ReplyQuote
Re: ATtiny4313 support
Posted by: sonix ()
Date: September 17, 2015 06:52PM

Hi Siberian,

thanks for your feedback.

> Thank YOU! Very very much!
You're welcome!


Yours sincerely
sonix


Siberian Wrote:
-------------------------------------------------------
> Hello again!
>
> sonix Wrote:
> --------------------------------------------------
> -----
> > Please could you test (read/write flash+eeprom
> > data, read/write only flash, read/write only
> > eeprom, read/write fusebit e.g. CKDIV8, erase
> > device) it and reply to me if everything is OK?
>
> I checked the all while except read/write some
> fusebit.
> Read/write memories works properly in different
> sequences.
>
> Thank YOU! Very very much!
>
> >
> >
> > Thanks in advance.
> >
> >
> > Yours sincerely
> > sonix
> >
> >
>
> > > Give more and different microcontrollers! :0)

Options: ReplyQuote


Return to LancOS.
Powered by Phorum.