PonyProg :  PonyProg Phorum PonyProg
PonyProg open discussion 
Go to Topic: Previous•Next
Go to: Forum List•Message List•New Topic•Search•Log In•Print View
ATmega88, ATmega168, ATtiny45 working
Posted by: Neptun ()
Date: May 12, 2007 03:22AM

Hi all,

just downloaded 2.07a Beta and tested without any problem:

ATtiny45
ATmega88
ATmega168

Great job (again)!

Options: Reply•Quote
Re: ATmega88, ATmega168, ATtiny45 working
Posted by: lancos ()
Date: May 12, 2007 04:46PM

Thank you for the feedback.

Cheers,
LancOS

Options: Reply•Quote
Re: ATmega88, ATmega168, ATtiny45 working
Posted by: shanmuaspireto ()
Date: August 02, 2007 04:13PM

hi


This is shanmu, I had downloaded the ponyprog2000 for serial programmming Atmega16 and i could not configure the ports, i couldn't fix the problem as I am New to this. If you have any valuable ideas please share your exdperience.

Everytime Iam getting " Device missing or unknown device-24"

Options: Reply•Quote
Re: ATmega88, ATmega168, ATtiny45 working
Posted by: Anonymous User ()
Date: August 05, 2007 09:31AM

can anybody help me how i configure ponypro to program atmega88? i have original si-prog kit with original avr adapter board is it able to program atmega88??

Options: Reply•Quote
Re: ATmega88, ATmega168, ATtiny45 working
Posted by: Anonymous User ()
Date: August 05, 2007 10:42PM

i got the same error " Device missing or unknown device-24"

Options: Reply•Quote
Re: ATmega88, ATmega168, ATtiny45 working
Posted by: 349244774 ()
Date: April 30, 2009 09:57AM

I need to flash *.hex into the ATmega88 for the project describle by http://www.tuxgraphics.org/electronics/200611/embedded-webserver.shtml

I got the ponyprog base board that I made 5 years ago, but I still need the adapter board, I am not sure which adapter board to be used. At the moment I could guess the avr adapter to be employed and I need to build one myself.

So let me know so that I can be 100% on the right track.

thanks you!

Options: Reply•Quote
Re: ATmega88, ATmega168, ATtiny45 working
Posted by: Mwakimani ()
Date: January 18, 2010 11:32PM

Am having a diferent problem. Am using atmega32. The ponyprog reports 'write failed' followed by 'program failed'. This message is causing me a headache. Pls help anyone.

Options: Reply•Quote
ATtiny2313, ATtiny45 working
Posted by: szal-44 ()
Date: February 26, 2010 05:20PM

hi

Can anybody help me how, i program ATtiny45 and ATtiny2313 with ponyprog2000 under LINUX?

SzAL

Options: Reply•Quote
Re: ATtiny2313, ATtiny45 working
Posted by: Ricardo Ruiz ()
Date: January 26, 2012 02:25PM

hi, everyone
I have atmega88pa, i tried to burnt it without success. searching in the web found that the problem is that has different signature:
The ATmega88P has signature 1E 93 0F
The ATmega88A has signature 1E 93 0A
So, if anybody can add this signature to ponyprog it will be great.
Thanks.

Options: Reply•Quote
ATMEGA88PA
Posted by: Corneliu ()
Date: April 09, 2012 11:21AM

ATMEGA88PA-tried all possible solution, but no success to read, write or erase


if is possible to recompile with new signature, i would be grateful

Options: Reply•Quote
Re: ATMEGA88PA
Posted by: guilherme ()
Date: January 23, 2013 10:05PM

is there any solution for atmega88pa using ponyprog?
Every time i got "write failed"
Anyone can help?

tks

Options: Reply•Quote
Re: ATMEGA88PA
Posted by: arc ()
Date: March 14, 2013 11:22AM

when to build new version ponyprog for atmega88P and Atmega48P which solution programming problems?

Options: Reply•Quote