ATmega88, ATmega168, ATtiny45 working
Posted by: Neptun ()
Date: May 12, 2007 03:22AM

Hi all,

just downloaded 2.07a Beta and tested without any problem:

ATtiny45
ATmega88
ATmega168

Great job (again)!

Re: ATmega88, ATmega168, ATtiny45 working
Posted by: lancos ()
Date: May 12, 2007 04:46PM

Thank you for the feedback.

Cheers,
LancOS

Re: ATmega88, ATmega168, ATtiny45 working
Posted by: shanmuaspireto ()
Date: August 02, 2007 04:13PM

hi


This is shanmu, I had downloaded the ponyprog2000 for serial programmming Atmega16 and i could not configure the ports, i couldn't fix the problem as I am New to this. If you have any valuable ideas please share your exdperience.

Everytime Iam getting " Device missing or unknown device-24"

Re: ATmega88, ATmega168, ATtiny45 working
Posted by: Anonymous User ()
Date: August 05, 2007 09:31AM

can anybody help me how i configure ponypro to program atmega88? i have original si-prog kit with original avr adapter board is it able to program atmega88??

Re: ATmega88, ATmega168, ATtiny45 working
Posted by: Anonymous User ()
Date: August 05, 2007 10:42PM

i got the same error " Device missing or unknown device-24"

Re: ATmega88, ATmega168, ATtiny45 working
Posted by: 349244774 ()
Date: April 30, 2009 09:57AM

I need to flash *.hex into the ATmega88 for the project describle by http://www.tuxgraphics.org/electronics/200611/embedded-webserver.shtml

I got the ponyprog base board that I made 5 years ago, but I still need the adapter board, I am not sure which adapter board to be used. At the moment I could guess the avr adapter to be employed and I need to build one myself.

So let me know so that I can be 100% on the right track.

thanks you!

Re: ATmega88, ATmega168, ATtiny45 working
Posted by: Mwakimani ()
Date: January 18, 2010 11:32PM

Am having a diferent problem. Am using atmega32. The ponyprog reports 'write failed' followed by 'program failed'. This message is causing me a headache. Pls help anyone.

ATtiny2313, ATtiny45 working
Posted by: szal-44 ()
Date: February 26, 2010 05:20PM

hi

Can anybody help me how, i program ATtiny45 and ATtiny2313 with ponyprog2000 under LINUX?

SzAL

Re: ATtiny2313, ATtiny45 working
Posted by: Ricardo Ruiz ()
Date: January 26, 2012 02:25PM

hi, everyone
I have atmega88pa, i tried to burnt it without success. searching in the web found that the problem is that has different signature:
The ATmega88P has signature 1E 93 0F
The ATmega88A has signature 1E 93 0A
So, if anybody can add this signature to ponyprog it will be great.
Thanks.

ATMEGA88PA
Posted by: Corneliu ()
Date: April 09, 2012 11:21AM

ATMEGA88PA-tried all possible solution, but no success to read, write or erase


if is possible to recompile with new signature, i would be grateful

Re: ATMEGA88PA
Posted by: guilherme ()
Date: January 23, 2013 10:05PM

is there any solution for atmega88pa using ponyprog?
Every time i got "write failed"
Anyone can help?

tks

Re: ATMEGA88PA
Posted by: arc ()
Date: March 14, 2013 11:22AM

when to build new version ponyprog for atmega88P and Atmega48P which solution programming problems?